Displaying Bd (Bluetooth Device) Address; Transferring The Phone Book - Pioneer DEH-P70BT Operation Manual

Section
08 Hands-free phoning
3 Press Multi-Control to display
Clear memory NO.
4 Push Multi-Control right to select
Clear memory YES.
Push to clear memory is displayed, and then
Clear memory YES is displayed. Deleting
phone is now on standby.
# Push Multi-Control left and select
Clear memory NO for deleting phone. If you do
not want to delete phone that you have selected,
select Clear memory NO and press
Multi-Control.
5 Press Multi-Control to delete the
phone.
After the phone is deleted, Deleted is dis-
played.
Displaying BD (Bluetooth
Device) address
Each device featuring Bluetooth technology is
allocated a unique 48-bit device address. It
consists of a 12-digit of hexadecimal string.
This unit can display the BD address of your
registered cellular phone featuring Bluetooth
technology.
1 Use Multi-Control to select a phone
that you want to display the BD address.
Set phone (e.g. Set phone 1) appears in the
display.
2 Push Multi-Control up or down to select
device name.
Selected registration numbers device name is
displayed.
3 Push Multi-Control right to display the
BD address.
12-digit hexadecimal string is displayed.
44
En
All manuals and user guides at all-guides.com

Transferring the phone book

If guest phone is connected to this unit via
Bluetooth technology, this function cannot be
selected.
It is possible to transfer phone book in your
cellular phone to this unit. You can transfer
whole phone book at a time.
! With some cellular phones, it may not be
possible to transfer whole phone book at a
time. In this case, transfer address one by
one from your phone book using your cellu-
lar phone.
! Up to 500 addresses can be stored in this
unit. Each users quota is listed below.
Phone 1 : 200 addresses
Phone 2 : 100 addresses
Phone 3 : 100 addresses
Phone 4 : 50 addresses
Phone 5 : 50 addresses
! Depending on the cellular phone that is
connected to this unit via Bluetooth tech-
nology, this unit cannot display the phone
book correctly. (Some characters may be
garbled.)
! If the phone book in the cellular phone con-
tains image data, phone book may not be
correctly transferred.
1 Use Multi-Control to select
PH.B.transfer.
PH.B.transfer appears in the display.
2 Push Multi-Control right to select
Transfer YES.
Transfer YES appears in the display.
# Push Multi-Control left to select Transfer NO
and phone book transfer is canceled.
3 Press Multi-Control to display the
phone book transfer standby mode.