Displaying Bd (Bluetooth Device) Address; Setting Up For Hands-Free Phoning - Pioneer Super Tuner IIID DEH-P5000UB Operation Manual

section
C_A_v_a_il_a_b_l_e_a_c_c_e_s_s_o_r_ie_s
~)
(III
II
Displaying BD (Bluetooth
Device) address
1 Use MULTI-CONTROL to select
DEVICE INFO in the function menu.
The device name
(PIONEER BT UNIT)
of this
unit appears in the display.
2 Press MULTI-CONTROL to display the
setting mode.
3 Use MULTI-CONTROL to select the de-
sired setting.
Turn to change the setting.
DEVICE NAME
(Device name)-BD
ADDRESS
(BD (Bluetooth Device) address)
[!J
Bluetooth Telephone
Basic Operations
If you use a Bluetooth adapter (e.g. CD-
BTB200), you can connect a cellular phone fea-
turing Bluetooth wireless technology to this
unit for hands-free, wireless calls, even while
driving.
~
Important
• Since this unit is on standby to connect with
your cellular phone via Bluetooth wireless
technology, using this unit without running
the engine can result in battery drainage.
• Advanced operations that require your atten-
tion such as dialing numbers on the monitor,
using phone book, etc., are prohibited while
you are driving. When you need to use these
advanced operations, stop your vehicle in a
safe place.
• Notes
• Equalizer curve for the phone source is fixed.
• When selecting the phone source, you can
only operate FADER/BALANCE (balance ad-
justment) in the audio menu.
Setting up for hands-free phoning
Before you can use the hands-free phoning
function you must set up the unit for use with
your cellular phone. This entails establishing a
Bluetooth wireless connection between this
unit and your phone, registering your phone
with this unit, and adjusting the volume level.
1 Connection
For detailed instructions on connecting your
phone to this unit via Bluetooth wireless tech-
nology, refer to Connecting a cellular phone on
page 37.
• Your phone should now be temporarily con-
nected. However, to make best use of the technol-
ogy, we recommend you register the phone to
this unit.
2 Registration
To register your temporarily connected phone,
refer to Registering a connected cellular phone
on page 38.
3 Volume adjustment
Adjust the earpiece volume on your cellular
phone for comfort. When adjusted, the volume
level is memorized in this unit as the default
setting.
• Caller's voice volume and ring volume may
vary depending on the type of cellular phone.
• If the difference between the ring volume and
caller's voice volume is big, overall volume level
may become unstable.
• Before disconnecting the cellular phone from
this unit, make sure to adjust the volume to a
proper level. If the volume is muted (zero level) on
your cellular phone, the volume level of your cel-
lular phone remains muted even after the cellular
phone is disconnected .
En
00