Rds; Introduction Of Rds Operation - Pioneer DEH-P70BT Operation Manual

Section
05

RDS

Introduction of RDS operation

1 2
RDS (radio data system) is a system for provid-
ing information along with FM broadcasts.
This inaudible information provides such fea-
tures as program service name, program type,
traffic announcement standby and automatic
tuning, intended to aid radio listeners in find-
ing and is tuning in to a desired station.
1 Source icon
Shows which source has been selected.
2 TEXT indicator
Shows when the radio text is received.
3 Preset number indicator
Shows which preset has been selected.
4 LOC indicator
Shows when local seek tuning is on.
5 Program service name
Shows the name of broadcast program.
6 Stereo (5) indicator
Shows that the frequency selected is being
broadcast in stereo.
7 Band indicator
Shows which band the radio is tuned to,
MW, LW or FM.
8 Signal level indicator
Shows the signal strength of cellular phone.
20
En
All manuals and user guides at all-guides.com
3 4 6 7 8 9
5 a b
! Signal level indicator may differ from the
actual signal level.
9 Battery strength indicator
Shows the battery strength of cellular
phone.
! Battery strength indicator may differ
from the actual battery strength.
a News ( ) indicator
Shows when the set news program is re-
ceived.
b TP ( ) indicator
Shows when a TP station is tuned in.
1 Press Multi-Control to display the main
menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2 Use Multi-Control to select FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name appears on the display.
3 Turn Multi-Control to select the func-
tion.
Turn Multi-Control clockwise to switch be-
tween the functions in the following order:
BSM (best stations memory)Regional (re-
gional)Local (local seek tuning)
PTY search (program type selection)TA
(traffic announcement standby)AF (alterna-
tive frequencies search)News (news pro-
gram interruption)
# You can also switch between the functions in
reverse order by turning Multi-Control counter-
clockwise.
# To return to the frequency display, press
BAND.
# If MW/LW band is selected, you can only se-
lect BSM or Local.