Tuner; Listening To The Radio - Pioneer DEH-P70BT Operation Manual

Tuner

Listening to the radio

1 2
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
This units AF (alternative frequencies search)
function can be turned on and off. AF should
be off for normal tuning operation (refer to
page 21).
1 Source icon
Shows which source has been selected.
2 Preset number indicator
Shows which preset has been selected.
3 LOC indicator
Shows when local seek tuning is on.
4 Stereo (5) indicator
Shows that the frequency selected is being
broadcast in stereo.
5 Frequency indicator
Shows to which frequency the tuner is
tuned.
6 Band indicator
Shows which band the radio is tuned to,
MW, LW or FM.
7 Signal level indicator
Shows the signal strength of cellular phone.
! Signal level indicator may differ from the
actual signal level.
All manuals and user guides at all-guides.com
3 4 6 7 8
5 9 a
8 Battery strength indicator
Shows the battery strength of cellular
phone.
! Battery strength indicator may differ
from the actual battery strength.
9 News ( ) indicator
Shows when the set news program is re-
ceived.
a TP ( ) indicator
Shows when a TP station is tuned in.
1 Press SOURCE to select the tuner.
Press SOURCE until you see Tuner displayed.
2 Press BAND to select a band.
Press BAND until the desired band is dis-
played, FM1, FM2, FM3 for FM or MW/LW.
3 To perform manual tuning, push
Multi-Control left or right.
The frequencies move up or down step by
step.
4 To perform seek tuning, push and hold
Multi-Control left or right for about one
second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
# You can cancel seek tuning by pushing
Multi-Control left or right.
# If you push and hold Multi-Control left or
right you can skip stations. Seek tuning starts as
soon as you release Multi-Control.
Section
04
17
En