Before First Use; Cleaning The Soleplate; Features; Assembly - Black & Decker X750 Instruction Manual

English
• Set the temperature control dial to the
min position before plugging in or out.
• Let the appliance cool down before
leaving it unattended and before
cleaning or inspecting any parts of the
appliance.
• The power supply cord should not
touch the hot soleplate during use or
during the cool down period.
• Do not touch the soleplate until it has
cooled down.
• Wait until the appliance has cooled
down before emptying the water tank
as the water may still be hot.
• Always diconnect the appliance from
the supply before filling, emptying,
cleaning, or carying out any
maintenance on the appliance.
• The iron must be used and rested on a
stable surface
• The iron is not to be used if it has been
dropped, if there are visible signs of
damage or if it is leaking

Features

1. Spray button
2. Steam control dial
3. Steam burst button
4. Temperature control dial
5. Heating light
6. Heel rest
7. Self-clean button
8. Cord storage
9. Maximum filling level indicator
10. Water tank
11. Soleplate
12. Water tank cover
13. Spray nozzle
Before first use

Cleaning the soleplate

• Make sure that the appliance is
unplugged.
• Fill the appliance with water as
described below.
• Use the self-clean system as described
below. When finished, wipe the
soleplate and steam vents with a cloth.
Some parts of the appliance have been
lightly greased and as a result the appliance
may smoke slightly when switched on for
the first time. This will cease after a short
while.

Assembly

Warning! Before assembly, make sure that
the appliance is switched off and
unplugged.
Filling the water tank (Fig. B)
In order to be able to use the steam
function or the spray feature, you will first
need to fill the water tank with water.
• Make sure that the appliance is
unplugged.
• Open the water tank cover (12).
• Hold the appliance at an angle as
shown.
• Fill the appliance with water using the
beaker provided.
• Close the water tank cover.
-5-