Inspection And Repairs; Extension Cables & Class 1 Product; Additional Safety Instructions For Irons; Electrical Safety - Black & Decker X750 Instruction Manual

English

Inspection and repairs

• Before use, check the appliance for
damaged or defective parts. Check for
breakage of parts, damage to switches
and any other conditions that may
affect its operation.
• Do not use the appliance if any part is
damaged or defective.
• Have any damaged or defective parts
repaired or replaced by an authorised
repair agent.
• Before use, check the power supply
cord for signs of damage, ageing and
wear.
• Do not use the appliance if the power
supply cord or mains plug is damaged
or defective.
• If the power supply cord or mains plug
is damaged or defective it must be
repaired by an authorised repair agent
in order to avoid a hazard. Do not cut
the power supply cord and do not
attempt to repair it yourself.
• Never attempt to remove or replace any
parts other than those specified in this
manual.

Electrical safety

This product must be earthed.
Always check that the mains voltage
corresponds to the voltage on the rating
plate.
• Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(Class 1) appliances. Unmodified plugs
and matching outlets will reduce the
risk of electric shock.
Extension cables & class 1 product
• A 3 core cable must be used as your
tool is earthed and of class 1
construction.
• Up to 30m (100 ft) can be used without
loss of power.
• This appliance is not intended for use by
young or infirm persons without
supervision. Children must be
supervised to ensure they do not play
with the appliance.
• If the supply cord is damaged, it must
be replaced by the manufacturer or an
authorised Black & Decker Service
Centre in order to avoid a hazard.

Additional safety instructions for irons

• Always route the cord carefully to avoid
a tripping hazard.
• Do not use the appliance near water.
• Do not place the appliance near heat
sources or directly under cabinets. Do
not use the appliance in the presence of
explosive or flammable materials.
• The filling apperture must not be
opened during use.
• Steam may escape from the soleplate.
• Surfaces may be hot during use and
during the cooldown period.
-4-