Before First Use - Black & Decker X2210 Manual

Additional safety instructions for
irons
• Always route the cord carefully to avoid
a tripping hazard.
• Do not use the appliance near water.
• Do not place the appliance near heat
sources or directly under cabinets. Do
not use the appliance in the presence of
explosive or flammable materials.
• The filling aperture must not be opened
during use.
• Steam may escape from the soleplate.
• Surfaces may be hot during use and
during the cool down period.
• Set the temperature control dial to the
min position before plugging in or out.
• Let the appliance cool down before
leaving it unattended and before
cleaning or inspecting any parts of the
appliance.
• The power supply cord should not touch
the hot soleplate during use or during
the cool down period.
• Do not touch the soleplate until it has
cooled down.
• Wait until the appliance has cooled down
before emptying the water tank as the
water may still be hot.
• Do not immerse the appliance, cored set
or plug in liquids
• Always disconnect the appliance from
the supply before filling, emptying,
cleaning, or carrying out any
maintenance on the appliance.
• The iron must not be left unattended
while it is connected to the supply mains
• The plug must be removed from the
socketoutlet before the water reservoir is
filled with water.
• The iron must be used and rested on a
stable surface.
• The iron is not to be used if it has been
dropped, if there are visible signs of
damage or if it is leaking.
Caution : Hot Surface.
Before first use
• Remove all packaging from the
appliance.
• Clean the appliance before first use.
Warning! Before filling the appliance, make
sure that the appliance is switched o and
unplugged.
Filling the water tank
In order to be able to use the steam
function, you will first need to fill the water
tank with water.
• Make sure that the appliance is
unplugged.
• Set the steam control to the no steam
position.
• Hold the appliance at an angle.
• Fill the appliance with water using the
beaker provided.
ENGLISH
5