Denso BHT-400-CE Reference Manual page 210

Commit
Reflects the value set from application to the Zero Config GUI.
￭ Syntax
[VB]
Public Shared Sub Commit()
[C#]
public static void Commit()
￭ Parameters
None
Exceptions
￭
None
Note
￭
Call this method prior to opening the wireless device if the value set from the library is used
and a connection is established with the network.
[Ex.] Changing the profile (ESSID:BHT, Infra: Infrastructure) Wep key created at Zero
Config to "1234567890".
[VB]
RF.Profile.Update();
Dim prof As RF.Profile = New Profile("BHT", EN_INFRA_MODE.INFRASTRUCTURE)
prof.WepKey = "1234567890"
RF.Profile.Commit();
[C#]
RF.Profile.Update();
RF.Profile prof = new Profile("BHT", EN_INFRA_MODE.INFRASTRUCTURE);
prof.WepKey = "1234567890"
RF.Profile.Commit();
- 204 -