Table of Contents
Advertisement
2. Development Procedure
2.1. Project Creation Procedure
1. Store the dedicated BHT class library (dll, xml file) in a suitable folder in the computer used for development.
2. Start up Visual Studio.NET.
3. Select [File] – [New] – [Project...] to create a new project.
4. At the [New Project] dialog box, set the [Project Types:] to "Visual Basic Projects" or "Visual C# Projects", and
the [Templates] to "Smart Device Application".
5. At the [Smart Device Application Wizard], set the [What platform do you want to target?] to "Windows CE ", and
the [What project type do you want to create?] to the actual project type to be created.
6. Open the [View] – [Solution Explorer] window.
7. Right-click the [Reference] icon, and select [Add References...] to start up the reference add menu.
8. Press [Browse...] and select the dll saved at step 1.
2.2. Assignment Procedure
Assignment using USB ActiveSync
1. Select [Tools] – [Options...] – [Device Tools] – [Devices] to start up the Device Tool.
2. Press [Save As...] with "Windows CE" selected at the [Show devices for platform:] and enter an appropriate
filename (e.g., "BHT AS").
3. With the "BHT AS" file created at step 2 selected, set [Transport:] to "TCP Connect Transport".
4. Press [Configure...] to open the "Configure TCP/IP Transport Settings" dialog box.
5. Select "Obtain an IP address automatically using ActiveSync" for the device IP address.
6. Press [OK] to exit the [Options] menu.
7. Connect the BHT and computer with the USB ActiveSync cable.
8. Select [Build...] – [Build solution] and then assign a solution.
Step 8 only is required from the second time onwards.
Assignment using Smart Device Authentication
1. Connect the BHT to the same network as the computer used for development.
2. Run SDAuthUtilDevice.exe at the BHT and press START.
3. Perform steps 1 to 4 listed above for the "Assignment using USB ActiveSync" procedure.
4. Select "Use Specific IP Address" for the device IP address, and enter the IP address that displays when the
SDAuthUtilDevice.exe file run at step 2 starts up.
5. Press [OK] to exit the [Options] menu.
6. Select [Tools] - [Smart Device Authentication Utility] to start up the Smart Device Authentication Utility.
7. Enter the IP address entered at step 4 in the [Smart Device Authentication Utility] dialog box and press [Set up
device].
8. If authentication is successful, press [Close] at the [Smart Device Authentication Utility] dialog box.
- 2 -
Advertisement
Table of Contents
