Spark Arresting Screen In Muffler - Stihl KM 130 R Instruction Manual

Cutting attachment turns when idling
N Turn the idle speed screw (LA)
counterclockwise until the working
tool stops moving – then turn
another 1/2 to 3/4 turn in the same
direction
If the working tool continues to
keep moving in idle even after
adjustment, have the machine
checked by a servicing dealer.
Erratic idling behavior, engine stalls
despite correction of LA-setting, poor
acceleration
The idle setting is too lean:
N Turn the low speed screw (L)
counterclockwise until the engine
runs and accelerates smoothly – but
no further than the stop
Erratic idling behavior
The idle setting is too rich:
N Turn the low speed screw (L)
clockwise until the engine runs and
accelerates smoothly – but no
further than the stop
KM 110 R, KM 130 R
Spark Arresting Screen in
Muffler
In some countries the muffler is
equipped with a spark arresting screen.
N If the engine is down on power,
check the spark arresting screen in
the muffler.
N Wait for the muffler to cool down.
N
Move the slide control to STOP-0.
N Take out the screw (1).
3
2
N Take out the screws (2) and remove
the shroud (3).
N Take out the screw (4).
N Lift the spark arresting screen (5)
and pull it out.
N Clean the spark arresting screen. If
the screen is damaged or heavily
1
carbonized, fit a new one.
N Refit the spark arresting screen.
N
Insert the screw and tighten it down
firmly.
N Fit the shroud.
2
English
17