Multi-effect
Multi-effect
The DP-01FX contains an input effector, which contains different
types of effects, grouped by the type of input (electric guitar, acoustic
guitar, vocals, etc.) that they are suitable for.
Figure 3.1: Effect controls
Assigning the effect
Although there are two inputs, the multi-effect can only be applied to
one of them at a time.
The multi effect produces a stereo output, so you can use it on stereo pairs, and
you can then assign the output to two tracks (see "Assigning inputs" on page 23).
Press and hold the
SHIFT
or
indicator lights, showing the input to which you want to apply the
B
multi-effect.
There is a third setting in which neither indicator is lit, showing that
the multi-effect is not in use on either input.
Selecting the effect type
Press the
key alone to bring up the multi-effect selection and
MULTI
editing screen:
Press and hold the
through the different effect types available:
EGTR
Electric guitar
AGTR
Acoustic guitar
BASS
Bass guitar
VOCAL
Vocals
DRUM
Drums and percussion
The effect (third line of the display) also changes as you change the
type, and so does the parameter value (on the fourth line).
Selecting the effect
Turn the
control to scroll through all available effects (including
TYPE
those in other effect types). Effects available are listed in "Available
multi-effect settings" on page 65.
Setting the parameter
Each multi-effect has one parameter (shown as
Use the
PARAMETER
parameter is different for different types of effects).
64
TASCAM DP-01 Owner's Manual
key and press the
MULTI
key and turn the
SHIFT
control to set the value of the parameter (the
key so that either the
A
control to scroll
TYPE
).
PAR