Clone Track; Clean Out; Undoing Operations; Figure 2.11: Cloning Tracks - Tascam D00871320A Owner's Manual

About track editing

CLONE TRACK

This copies a track or pair of tracks to another track or pair of tracks.
There are no IN and OUT points when cloning.
There are two values that you can change:
Src. Trk
Select an individual track (
, ) or the stereo track.
5/6 7/8 MASTER
Dst. Trk
This sets the destination track or tracks to which the source track
is cloned. What you can select here depends on what you have selected for
the source track. If you have selected a single track, you can select tracks
through here. If you have selected a pair of tracks (for instance,
8
can only select track pairs here.
Press to perform the operation or
YES
• Mix down to the mix master track, using the
("Mixdown and mastering" on page 26) to add reverb to your mix.
RETURN
• Clone the stereo mix to a pair of tracks.
• Disconnect the drum machine from the
jacks. Make sure that the drum machine is set up to be synchro-
RETURN
nized to the DP-01 ("Working with MIDI" on page 38).
• Mix down again with only the two cloned tracks, using the
control to add and adjust the levels of the drum machine. You now
RETURN
have a mix including the drum machine as well as the effect added to the
main tracks.

CLEAN OUT

This deletes all the material in a track or tracks. There are no IN and
OUT points when performing the clean out function.
There is only one value that you can change:
Src. Trk
Select an individual track (
, ), or all the tracks (
5/6 7/8 1-8
Press to perform the operation or
YES

Undoing operations

If you have made a mistake, very often you can undo it. This
includes the track editing operations described here, as well as most
other common operations you can perform (including recording).
Press the key briefly, to undo the last undoable action.
UNDO
or
Press and hold the
UNDO
screen:
REDO
Event numbering starts at
tory list (you can't change this list)
54
TASCAM DP-01 Owner's Manual
through ), a pair of tracks (
1 8
to leave this screen.
NO
EFFECT SEND
STEREO MIX
through ), a pair of tracks (
1 8
).
to leave this screen.
NO
key for about a second, to show the
— at the bottom of the event his-
0 START UP
, ,
1/2 3/4
1
), you
1/2
and
EFFECT
and connect it to the
EFFECT
, ,
1/2 3/4
UNDO/

Figure 2.11: Cloning tracks

If you try to select
the same track as a
destination that you have selected
as the source, when you press the
key, a message will appear.
YES
Although you can-
not mix the inputs
of the to the mixed
STEREO MIX
master track, you can add a drum
machine (say for instance) to the
mix in the following way:
Figure 2.12: Cleaning out a
track
You must have per-
formed at least one
undoable action after switching on
for the undo function to work.