Tascam D00871320A Owner's Manual page 19

External stereo input
jacks on the rear panel marked
These can be used to connect an external stereo sub mixer, synthesizer,
drum machine, CD player, etc.
This stereo signal is routed to the analog
be recorded on the DP 01, nor can you adjust the signal level using the DP
01.
Digital output
Use a standard optical digital cable to connect this (rear
panel, close to the power switch) to a suitable digital stereo input of a mon
itoring system, or stereo recorder.
The signals sent from this are the same as those sent from the
jacks (although the
STEREO MIX
output).
MIDI output
Use this (rear panel) to connect a sequencer, drum machine,
etc. which can be started, stopped and synchronized with the DP 01. See
"Working with MIDI" on page 38 for details.
The DP 01 has two 1/4" mono unbalanced
.
STEREO MIX
LINE OUTPUT
signals are not output through the digital
Starting out with your DP-01
jacks. They cannot
(CD, MD) using the digital connec-
tion, while using the
LINE OUTPUT
jacks for monitoring.
TASCAM DP-01 Owner's Manual
You can connect a
digital recorder
LINE OUTPUT
19