Multi-Effect; Assigning The Effect; Selecting The Effect Type; Selecting The Effect - Tascam DP-01 Owner's Manual

Multi-effect

Multi-effect
The DP-01FX contains an input effector, which contains different types of effect,
grouped by the type of input (electric guitar, acoustic guitar, vocals, etc.) that
they are suitable for.

Figure 3.1: Effect controls

Assigning the effect

Although there are two inputs, the multi-effect can only drive one of them at a
time.
The multi-effect produces a stereo output, so you can assign the output to two
tracks (see "Assigning inputs" on page 20).
...
Press and hold the
SHIFT
or indicator lights, showing the input which will use the multi-
A B
effect.
There is a third setting in which neither indicator is lit, showing that
the multi-effect is not in use on either effect.

Selecting the effect type

...
Press the key alone to bring up the multi-effect selection and
MULTI
editing screen:
- M U L T I
<
P A R :
...
Press and hold the
through the different effect types available:
EGTR Electric guitar
AGTR Acoustic guitar
BASS Bass guitar
VOCAL Vocals
DRUM Drums and percussion
The effect (third line of the display) also changes as you change the
type, and so does the parameter value.

Selecting the effect

...
Turn the control to scroll through all available effects (including
TYPE
those in other effect types. Effects available are given in ("Available
multi-effect settings" on page 61.

Setting the parameter

...
Each multi-effect has one parameter (shown as
...
Use the
PARAMETER
parameter which is changed and the range of values differ according to
the selected effect).
60
TASCAM DP-01 Owner's Manual
key and press the
MULTI
E F F E C T
T r a D i s t >
. . E G T R . .
8 3 V O L : 1 0 0
key and turn the
SHIFT
control to set the value of the parameter (the
key so that either the
-
control to scroll
TYPE
).
PAR