Clone Track (Track Duplication) - Tascam DP-006 Owner's Manual

IN/OUT
These show the starting/ending points when it is necessary to define a part of
a recording for editing.
However, you cannot change the IN and OUT points when using a track
editing function. Set these points on the I /O SETTING screen, which you
can open by pressing the IN/OUT button. ("Setting IN and OUT points" on
page 65.)
Example of IN and OUT items
DESTINATION TRK (copy destination track)
Use this to set the track that will be the destination of a copy, insert or clone
edit.
If a mono track was set as the SOURCE TRK , the DESTINATION TRK
item options will also be mono tracks.
If a stereo track was set as the SOURCE TRK , the DESTINATION TRK
item options will be stereo tracks and 1 /2 (track pair).
Example of DESTINATION TRK item

CLONE TRACK (track duplication)

Using CLONE TRACK you can create a copy of a single track, a track pair or
a master track on a different track (or tracks).
This copies the entire track, so the IN and OUT points have no effect.
The parameters that can be set are as follows.
• SOURCE TRK (1, 2, 3, 4, 1/2, MST)
• DESTINATION TRK
NOTE
If you choose the same track for both the SOURCE TRK item and the
DESTINATION TRK item and press the F2 [EXEC] button, a Same
T rack pop-up message appears and the operation is cancelled.
8 – Editing Tracks
69
TASCAM DP-006