Using The Remote's Dedicated Key To Switch Modes; Assigning A New Track Number Manually - Tascam SS-R1 Owner's Manual

6 − Recording
• If is selected
DD
As when is selected, use the DELAY item to
LEVEL
specify the time from when a signal exceeding the
auto track level is detected until the new track num-
ber is assigned, in steps of one frame (one frame is
1/75 of a second).
• If is selected
T I ME
Use the INTERVAL item to specify the time interval
at which the track number is assigned, in a range of 1
–10 seconds (one-second steps).

Using the remote's dedicated key to switch modes

Each time you press the remote's
Track function mode will cycle in the order of
.
∑ ∑
LEVEL DD T I ME

Assigning a new track number manually

You can assign a new track number manually by pressing
the RECORD key during recording.
However, you cannot create a track that is shorter than four
seconds.

TASCAM SS-R1
A.TRACK key, the Auto
∑
OFF
7 When you've finished making settings, press the
front panel
TIME (ESC)
key) to return to the home screen.
CLR/ESC
NOTE
This setting is remembered even when you turn off
the power.
NOTE
If you recorded in WAV format, you can use the edit-
ing functions to divide or join tracks after they have
been recorded (see "Operations in the file menu
screen" on page 50).
key (or the remote's