Table of Contents
Advertisement
Connections
Mixer
Connecting headphones
Connect your stereo headphones to the
Use the
knob located above the
PHONES
adjust the volume.
Connecting a PS/2 keyboard
You can use a keyboard to enter file (track) names and
folder names, and also use it to control the SS-R1 (see
"Operation using a computer keyboard" on page 60).
Connecting audio devices (inputs)
Connect an external audio source (e.g., CD player, mixer)
to the SS-R1's
ANALOG INPUTS (BALANCED)
ANALOG INPUTS (UNBALANCED)
jack. To select the input source, use the REC menu item
INPUT SELECT. To adjust the input volume, use the REC
menu item INPUT VOLUME.
Computer
jack.
PHONES
jack to
PHONES
jacks,
jacks, or
DIGITAL IN
4 − Preparations
4 − Preparations
External controller
Connecting audio devices (outputs )
Connect an external monitor system or mixer to the SS-R1's
ANALOG OUTPUTS (BALANCED)
OUTPUTS (UNBALANCED)
Computer
If you connect the SS-R1's RS-232C connector to your
computer's RS-232C connector, you'll be able to control
the SS-R1 from your computer via a serial connection.
After making connections, you'll need to make the correct
settings on your computer (see "Using the RS-232C con-
nector" on page 63).
Control via a parallel connection
If you want to control the SS-R1 via a parallel connection
from an external controller, use the
(25-pin D-sub connector). For details on the pin configura-
tion of the
connector, refer to "Control con-
PARALLEL
nections" (page 8).
Headphone
Keyboard
plugs,
ANALOG
jacks, or
DIGITAL OUT
jack.
PARALLEL
connector
1
TASCAM SS-R1
Advertisement
Table of Contents
