Table of Contents
Advertisement
TIP
By using the Key Control function in conjunction with
the Pitch Control function, you can change only the
speed without affecting the pitch (see "Key Control
play" on page 27).
Specifying the Pitch Step
You can change the pitch step.
Pitch steps are the amount of pitch change produced by
turning the
knob one step or by pressing the
PITCH
remote's
key once.
PITCH +/-
You must make the Pitch Step setting from the SS-R1 itself
(this setting cannot be made from the remote).
1 Hold down the front panel
The pitch step setting screen will appear.
Key Control playback
You can use the Key Control function to change the key
(pitch) of playback.
Here is how to use menu mode to turn Key Control on/off
and adjust the key level setting (for details on menu opera-
tions, refer to "Operations in the menu screen" on page 16).
1 Press the
key to access the main menu list
MENU
screen.
2 Select the PLAY menu.
3 Select the KEY item.
In this state you can turn Key Control on/off.
4 Turn the KEY item
ON
5 Press the front panel
˚
key) to proceed to the level setting
CURSOR
¥
screen.
knob.
PITCH
.
key (or the remote's
5 − Playback
NOTE
When you turn Pitch Control playback on/off during
playback, the playback sound may be momentarily
interrupted.
2 While this screen is displayed, you can turn the
dial to specify the pitch step in a
MULTI JOG
range of 0.1%–1.0%.
3 When you've finished making the setting, press
the front panel
TIME (ESC)
key) to return to the home screen.
CLR/ESC
NOTE
The pitch control setting is remembered even when
you turn off the power.
6 Turn the front panel
MULTI JOG
remote's
CURSOR
§ , ¶
sired key level, and press the front panel
(or the remote's
CURSOR
You can select the key level from a range of 6– 1, 0
(no pitch change), #1–#6.
7 When you've finished making the setting, press
the front panel
TIME (ESC)
key) to return to the home screen.
CLR/ESC
The Key Control function will be on, and the home
screen will indicate KEY .
NOTE
•
The Key Control setting is remembered even when
the power is turned off.
•
When using the Key Control function, the playback
sound may appear to quaver. This is due to the
processing being applied to the playback, and is
not a malfunction.
TIP
If you turn on both the Key Control function and the
Pitch Control function, the key (pitch) will be specified
by the Key Control function and the speed will be
determined by the Pitch Control function. (In other
words, using Pitch Control to change the speed will
not affect the pitch of the sound). Thus, if you set KEY
LEVEL to
and turn the Key Control function on, you
0
can use Pitch Control to change the playback speed by
itself without affecting the pitch.
key (or the remote's
dial (or use the
keys) to select the de-
key
˚
key).
¥
key (or the remote's
TASCAM SS-R1
Advertisement
Table of Contents
