LG AS40GWWK0 Owner's Manual page 31

Problem
• Sensor may be dirty or blocked
There has been
by foreign material.
no change in
micro dust
• Air purifier may be in enclosed
concentration.
area.
The fine dust • Air purifier installed in area
concentration with constant influx of outside
value keeps air.
showing high.
Air quality light • Air quality issue is from odor.
remains violet/
pink while PM
levels show
moderate/
unhealthy.
• The deodorizing filter has
become dirty.
• The air purifier is being used
instead of a vent hood while
The filter
cooking.
produces odors.
• The power plug is unplugged
from the outlet.
I can't connect
• The wireless router connected
to the product
with the product is not working.
in the LG Smart
ThinQ app.
• The product is too far away
from the wireless router.
I can't register
• Your wireless router may be
the product in
not working properly.
the LG Smart
ThinQ app.
• You looked at the different dust
The dust
particle.
concentration
levels are
different
between the
product and the
LG Smart ThinQ
app.
Possible Cause
TROUBLESHOOTING
Solutions
• See instructions for cleaning sensor.
• Indoor air quality may stay the same in
an enclosed area.
• Levels can remain high in areas where
there is a constant influx of outside air.
• The air quality indicator is an overall
evaluation based on odor and dust. If
an odor is strong while PM levels are
moderate, the light may remain on
violet/pink.
• Replace the filter. Filter life-expectancy
can vary based on usage environment.
• Filter life can be greatly reduced if
the air purifier is used while cooking
strong-smelling or oily food. Do not use
the product in place of a vent hood.
Ventilate the area during cooking to
remove strong odors and oily splatter,
then use the air purifier to eliminate any
remaining odors.
• Plug in the power cord of the product.
• Power off the wireless router and on
again.
• Check if there is an Internet connection
problem with the router.
• Move the wireless router near the
product.
• Some carriers provide routers that are
available to their members only. If you
have an outdated model, contact your
carrier to have it replaced with a newer
one.
• Make sure that the levels of the
super ultra-fine/ultra-fine/fine dust are
displayed consistently between the LG
Smart ThinQ app and your product.
• The difference in the values could be
caused by the difference in update time
between the LG Smart ThinQ app and
the product.
31