Operation - Ryobi GDM920 Operator's Manual

IF YOUR CARBON MONOXIDE ALARM SOUNDS/ACTIVATES
Refer to VISUAL AND AUDIBLE ALERT SIGNALS section to determine the type of alarm.
FOR CO ALARM
WARNING:
If the CO Alarm is beeping and ALARM light is flashing red, evacuate garage and move everyone to fresh air. Feel doors
with the back of your hand before opening them. If a door is cool, open it slowly. Do not open a hot door. Keep garage
door and other doors and windows closed, unless you must escape through them.
WARNING:
Actuation of your CO alarm indicates the presence of carbon monoxide
(CO) which can KILL YOU. If alarm signal sounds:
1. Operate reset/silence button.
2. Call your emergency services (fire department or 911).
__________________________________________________________
3. Immediately move to fresh air – outdoors or by an open door/window.
Do a head count to check that all persons are accounted for. Do not
reenter the premises nor move away from the open door/window
until the emergency services responders have arrived, the premises
have been aired out, and your alarm remains in its normal condition.
4. After following steps 1 – 3, if your alarm reactivates within a 24 hour
period, repeat steps 1 – 3 and call a qualified appliance technician
(_____________________________) to investigate for sources of CO
from fuel burning equipment and appliances, and inspect for proper
operation of this equipment. If problems are identified during this
inspection have the equipment serviced immediately. Note any
combustion equipment not inspected by the technician and consult
the manufacturers' instructions, or contact the manufacturers directly,
for more information about CO safety and this equipment. Make
sure that motor vehicles are not, and have not been, operating in an
attached garage or adjacent to the residence.
NOTE: The information contained in the previous warning is provided on two self-adhesive labels included with this unit.
Add the telephone numbers of your local fire, emergency responders, and qualified appliance technician to the labels and
adhere the labels in conspicuous areas.

OPERATION

10 — English