Playing A Specific Tune From The Beginning (Single Play) - Tascam CD-601MKII Owner's Manual

Tascam owner's manual cd player cd-601mkii
Hide thumbs Also See for CD-601MKII:
Table of Contents

Advertisement

BASIC OPERATIONS
Playing a Specific Tune from the
Beginning (SINGLE play)
The following describes the procedure for playing the final
take (online playback) after selecting and confirming a
desired tune (monitor playback). The following description
assumes that the procedure is performed with menu items
at their default settings.
1 Select the single mode using the PLAY MODE key.
Press the PLAY MODE key several times until "SINGLE"
is lit in the playback mode display area of the display
window.
2 Press the PLAY/PAUSE key to enter the monitor PAUSE
mode. The PLAY/PAUSE key starts blinking.
3 Select the tune (track) to play back using the TRACK
key.
The monitor PAUSE mode is enabled at the start of the
selected track.
4 To check the playback sound, press the PLAY/PAUSE
key to perform monitor playback.
In addition to using an external monitor system, the
monitor playback sound can also be checked on
headphones connected to the PHONES terminal on
the CD player.
5 After checking the monitor playback sound, press the
READY key.
The disc returns to the tune start point, and the CD
player enters the online READY mode. (The READY key
is lit.)
6 Press the ON LINE key to start online playback.
When the tune ends, playback automatically stops.
To cancel playback, press the STOP key.
[NOTE]
In the default setting, the failsafe function is ON, and
operation of keys other than STOP, PLAY MODE and
DISP MODE is not accepted during online playback.
However, the menu system can be used to set the
failsafe function OFF. (→ page 23 "Failsafe Function")
Display of playback position
During playback, the approximate playback position in
the track is displayed on the character display area of the
display window in the form of a 12-dot bar. The number
of square dots in this bar increases the further playback
progresses. The following example shows that about 2/3 of
the track has been played back.
When the time display in the display window is the track
remaining mode (REMAIN), all of the square dots light
at the beginning of the track, and decrease as playback
progresses.
13
TASCAM CD-601MKII

Advertisement

Table of Contents
loading

Table of Contents