Making Telephone Calls; Making Internal Calls - Disty distybox 300 Operating Instructions Manual

18
NOTE
3

Making telephone calls

Depending on your DECT base station and the setting of your distybox,
you will either hear the DECT base station dialling tone or the internal dis-
tybox dialling tone when you lift the handset of the connected device.
3.1

Making internal calls

Internal phone calls are calls to other cordless phones registered on the
same base station.
Input Function
Internal cordless unit 1 is called
**1
**2 Internal cordless unit 2 is called
**3 Internal cordless unit 3 is called
**4 Internal cordless unit 4 is called
**5 Internal cordless unit 5 is called
**6 Internal cordless unit 6 is called
**7 Internal cordless unit 7 is called
**8 Internal cordless unit 8 is called
**9 Internal cordless unit 9 is called
**06 Internal hunt group call (if supported by the base station)
Within the first 10 minutes after the distybox is restarted, the key combi-
nation can be used to activate programming mode. Internal
* * 9
cordless unit 9 cannot be called during this time.
Assuming your DECT base station supports them, the following functions
can be activated by entering various codes. Please observe the operating
instructions for your DECT base station.
Input Function
+
**0 1 INT key
+
**0 2 R key (flash key)
**0 + 3 Pause key
**0 + 4 DTMF dial changeover
**0 + 5 Pulse dial changeover
**0 + 7 ** 0 will be sent to the base station