Disty distybox 300 Operating Instructions Manual page 32

10
NOTE
2 Registration / programming
Function
Send always Keypad Information: This setting has to be used if your
base station is a distybase Duo or other specified ISDN system.
Factory setting: 1
Fax / Data mode
"Telephone" Mode: This setting should be used if a telephone is con-
nected to the distybox.
"Fax" Mode: This setting should be used if a fax machine or modem is
connected to the distybox. The setting may improve transmission qua-
lity.
Not all DECT base stations support this feature, however; if in doubt,
use "Telephone" mode.
Factory setting: 0
Internal dialling tone
An internal dialling tone is sounded immediately on lifting the handset.
The dialling tone is suppressed using this setting. This setting is not
recommended if parameter 71 is set to 0.
With this setting the internal dialling tone is sounded as a continuous
tone (425 Hz). This setting is useful if your base station is connected
to a direct trunk line.
With this setting the internal dialling tone is sounded as an interrupted
tone (450 Hz). This setting is useful if your base station is connected
to a phone system that also generates an interrupted dialling tone.
Factory setting: 0
Parameter Other input
code
40 2 #
41 0 #
41 1 #
42 0 #
42 1 #
42 2 #