Disty distybox 300 Operating Instructions Manual page 37

2
NOTE
Registration / programming
Function
Set PARK number
As an option, the registration process can be carried out using the
PARK number of your DECT base station (PARK = Portable Access
Rights Key). This can have up to 15 digits.
The procedure is advisable if the registration process cannot be com-
pleted due to other active DECT base stations. Please refer to the
user's guide for your base station for further details about PARK num-
bers.
Factory setting: no PARK number set.
Activate PARK/ARI number
The PARK/ARI number set under programming point 80/85 is not
used during the registration process.
The PARK/ARI number set under programming point 80/85 is used
during the registration process.
Factory setting: 0
Set ARI number
Instead of the PARK number (see Parameter 80) the ARI number can
be used for subsciption. For input of the ARI number use 31 as prefix.
Factory setting: no ARI number set.
Reset distybox
The distybox is reset to the factory settings.
This means, however, that the distybox is no longer registered on a
base station. All previous settings are deleted.
After unplugging / plugging in the adapter, the distybox is restarted
and reprogramming of the distybox can begin.
Parameter Other input
code
80 PARK number #
81 0 #
81 1 #
85 31 ARI #
90 #
15