Download Print this page
Watts Premier Zero Waste Retrofit Kit Instruction

Watts Premier Zero Waste Retrofit Kit Instruction

Advertisement

Quick Links

Zero Waste Retrofit Kit Instruction
B
CHECK VALVE
A
BLACK TUBE
F
F
E
SELENOID
H
TRANSFORMER
NOTE: UNIT IS NOT INTENDED FOR USE WITH
TANKLESS WATER HEATERS
Introduction
Thank you for buying the Zero Waste Retrofit Kit. This kit is designed
to retrofit existing reverse osmosis systems and save water from
being wasted.
How it works:
This conversion kit works by using the booster pump to increase
the pressure throughout the system so that the brine water (which is
usually wasted) can be recycled back into the hot water line. Here is
what each component does:
• Booster Pump: Boosts the pressure throughout the system.
• Solenoid: Shuts off the water to the unit when the tank is full.
• Pressure Switch: Turns off the pump and closes the solenoid
when the tank is full.
• Check Valve: A one-way valve that allows the brine (waste)
water to get pushed into the hot water, but not let any hot
water back in.
• Flow Restrictor: Controls how much water is returned into
the hot water line. See instructions for sizing.
• Transformer: Provides power to the electrical components.
8716 West Ludlow Dr, Ste 1, Peoria, AZ 85381 • Tel. (800) 752-5582 • www.wattspremier.com
Manual #199355
FLOW RESTRICTOR FOR 25-35 GPD
C
(500ML - GREEN INSERT)
FLOW RESTRICTOR FOR 50 GPD
D
(700ML- PURPLE INSERT)
P
GREEN TUBE
BOOSTER
G
PUMP
J
I
PRESSURE
SWITCH
L
DRAIN
SADDLE
PLUG
M
ELBOW
N
Package Contents:
LABEL
PART#
DESCRIPTION
A
610117
BLACK TUBE
B
610019
DOUBLE-CHECK VALVE
C
622055
500 mL FLOW RESTRICTOR (GREEN INSERT)
D
622054
700 mL FLOW RESTRICTOR (PURPLE INSERT)
E
152035
SOLENOID
F
125088
1/4" QC x 1/8" MPT ELBOW FITTING
G
152008
BOOSTER PUMP
H
252004
TRANSFORMER
I
152030
PRESSURE SWITCH
J
228048
1/4" QC x 3/8" STEM FITTING
K
560080
ADAPT-A-VALVE w/ BRASS ADAPTERS & WASHER
L
228073
DRAIN SADDLE PLUG
M
125089
1/4" STEM x 1/4" QC ELBOW
N
125002
COMPRESSION NUT FOR 1/4" FITTING
O
152044
WIRE HARNESS
P
610109
GREEN TUBE
Rev 08/14/15
O
WIRE
HARNESS
J
ADAPT-A-VALVE
NUT
A Watts Water Technologies Company
© 2015 Watts Premier
K
QTY
1
1
1
1
1
2
1
1
1
2
1
1
1
3
1
1

Advertisement

loading

Summary of Contents for Watts Premier Zero Waste Retrofit Kit

  • Page 1 Introduction LABEL PART# DESCRIPTION 610117 BLACK TUBE Thank you for buying the Zero Waste Retrofit Kit. This kit is designed 610019 DOUBLE-CHECK VALVE to retrofit existing reverse osmosis systems and save water from being wasted. 622055 500 mL FLOW RESTRICTOR (GREEN INSERT)
  • Page 2 Reverse osmosis system must use a single 25-50 GPD membrane _____ A non-switched outlet 8716 West Ludlow Dr, Ste 1, Peoria, AZ 85381 • Tel. (800) 752-5582 • www.wattspremier.com A Watts Water Technologies Company Manual #199355 Rev 08/14/15 © 2015 Watts Premier...
  • Page 3 Step 10 - Choose the correct configuration on the following pages for your specific unit 8716 West Ludlow Dr, Ste 1, Peoria, AZ 85381 • Tel. (800) 752-5582 • www.wattspremier.com A Watts Water Technologies Company Manual #199355 Rev 08/14/15 © 2015 Watts Premier...
  • Page 4 Step 5 - Splice the pressure switch on the line leading to the tank 8716 West Ludlow Dr, Ste 1, Peoria, AZ 85381 • Tel. (800) 752-5582 • www.wattspremier.com A Watts Water Technologies Company Manual #199355 Rev 08/14/15 © 2015 Watts Premier...
  • Page 5 Step 6 - Splice the pressure switch on the line leading to the tank 8716 West Ludlow Dr, Ste 1, Peoria, AZ 85381 • Tel. (800) 752-5582 • www.wattspremier.com A Watts Water Technologies Company Manual #199355 Rev 08/14/15 © 2015 Watts Premier...
  • Page 6: Warranty

    Warranty LIMITED WARRANTY: Watts Premier warrants each product to be free from defects in material and workmanship for a period of one year from the date of original shipment. In the event of such defects within the warranty period, the Company will, at its option, replace or recondition the product without charge.