Troubleshooting - Honeywell 360 Degrees Surround Heater HZ-0360 Series Instruction Manual

HZ-0360_OM v7.0.qxd:HZ-2200-3200-3220_OM_Rev1
SAFETY FEATURES
The 360° Surround Heater™ is equipped with several devices and features for added protection:
• 360° SafetyTIP™ is an all-around tip-over switch that disables the heater if it is accidentally
tipped in any direction.
• A high temperature safety control prevents overheating.
• This heater is also equipped with a thermal cut-off fuse that will permanently shut down the
heater should it operate at a higher than normal temperature.
• This heater was created using a high quality safety plastic.
CLEANING
We recommend that the 360° Surround Heater™ be cleaned at least once a month and before
off-season storage.
• Turn the heater OFF (
• Use a dry cloth only to clean the external surfaces of the heater. DO NOT USE WATER, WAXES,
POLISHES OR ANY CHEMICAL SOLUTION.
STORAGE
• Clean your 360° Surround Heater™ using the above-mentioned steps. Wrap the cord around the
unit. Place in its original box and store it in a cool, dry place.
• This heater does not disassemble.

TROUBLESHOOTING

If your 360° Surround Heater™ shuts off unexpectedly or fails to operate, one of your heater safety
features may have been activated to prevent overheating.
• Be sure it is plugged in and that the electrical outlet is working.
• Check your Thermostat Control setting. The unit may simply be off because you have reached
your desired heat setting.
• Check for any obstructions. If you find an obstruction, turn the heater OFF (
Allow the heater to cool completely, then remove the obstruction. Wait at least 10 minutes, then
re-plug the heater in and follow the OPERATION instructions.
ELECTRICAL RATING
This product is rated 12.5 Amps (1500 watts) @ 120V, 60Hz.
All manuals and user guides at all-guides.com
o
) and unplug it. Allow it to cool.
4/15/10 12:08 PM
o
) and unplug it.
Page 4