Download Table of Contents Print this page

Troubleshooting - Honeywell QuickHeat HZ-817 Series Manual

Advertisement

Available languages
Table of Contents

TROUBLESHOOTING

If your heater shuts off unexpectedly or fails to operate, one of your heater's safety features may have
been activated to prevent overheating.
• Be sure the power cord is plugged into a working electrical outlet.
• Check for any obstructions. If you find one, turn the heater OFF and unplug it.
• Wait at least 10 minutes to allow the heater to cool completely before removing any obstruction.
When done, plug in the heater and follow the OPERATION instructions.
CONSUMER RELATIONS
Mail questions or comments to:
Kaz, Incorporated
Consumer Relations Dept.
250 Turnpike Road
Southborough, MA 01772
NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER RELATIONS FIRST OR SEE
YOUR WARRANTY. DO NOT RETURN THE HEATER TO THE ORIGINAL PLACE OF PURCHASE. DO NOT
ATTEMPT TO OPEN THE MOTOR HOUSING YOURSELF, DOING SO MAY VOID YOUR WARRANTY AND
CAUSE DAMAGE TO THE PRODUCT OR PERSONAL INJURY.
CLEANING AND STORAGE
We recommend that the heater be cleaned at least once a month and before off-season storage.
• Turn the heater OFF and unplug it. Allow it to cool.
• Use a dry cloth only to clean the external surfaces of the heater. DO NOT USE WATER, WAX, POLISH
OR ANY CHEMICAL SOLUTION.
• Clean your heater using the above-mentioned steps, then pack the heater in its original container and
store it in a cool dry place.
• This heater does not disassemble.
ELECTRICAL RATINGS
This product is rated 12.5 amps (1500W) at 120V, 60 Hz.
Call us toll-free at: 1-800-477-0457
E-mail: consumerrelations@kaz.com
Or visit our website at: www.kaz.com
Please be sure to specify a model number.

Advertisement

Table of Contents
loading

Table of Contents