Self Diagnostics; Ddc (Display Data Channel); Low Radiation Compliance (Mpr Ii) - LG 99T User Manual

Self Diagnostics

The Studioworks 99T has a SELF DIAGNOSTICS OSD feature that
pops up when there may be possible causes of non-operation. The
OSD would highlight a possible reason the display is not showing an
image. An example of this may be when you turn on the monitor with
no signal cable attached. The monitor will display the SELF
DIAGNOSTICS OSD with the CHECK INPUT SIGNAL. This would be
a clue for you to check the signal connections.
C H E C K : I N P U T S I G N A L
N O S I G N A L D E T E C T E D

DDC (Display Data Channel)

DDC is a communication channel over which the monitor
automatically informs the host system (PC) about its capabilities. This
monitor has three DDC function; DDC1, DDC2B.
DDC1 and DDC2B carry out uni-directional communication between
the PC and the monitor. Under these situations, the PC sends display
data to the monitor but not commands to control the monitor settings.
NOTE : PC must support DDC functions to do this.
If you using the 5 BNC connector with other types of video
cards, this monitor has not support DDC function.

Low Radiation Compliance (MPR II)

This monitor meets one of the strictest guidelines available today for
low radiation emissions, offering the user extra shielding and an
antistatic screen coating. These guidelines, set forth by a government
agency in Sweden, limit the amount of emission allowed in the
Extremely Low Frequency (ELF) and Very Low Frequency (VLF)
electromagnetic range.
S E L F D I A G N O S T I C S
17