Low Radiation Compliance (Mpr Ii); Self Diagnostics; Ddc (Display Data Channel) - LG StudioWorks 775N User Manual

Low Radiation Compliance (MPR II)

This monitor meets one of the strictest guidelines available today for
low radiation emissions, offering the user extra shielding and an
antistatic screen coating. These guidelines, set forth by a government
agency in Sweden, limit the amount of emission allowed in the
Extremely Low Frequency (ELF) and Very Low Frequency (VLF)
electromagnetic range.

Self Diagnostics

S E L F D I A G N O S T I C S
C H E C K S I G N A L C A B L E
N O S I G N A L D E T E C T E D
when it is On but no signal is detected. In this case the message
CHECK SIGNAL CABLE will be high lighted, alerting you to check
the signal cable connections.

DDC (Display Data Channel)

DDC is a communication channel over which the monitor automatically
informs the host system (PC) about its capabilities. This monitor has
two DDC function; DDC2B carries out uni-directional communication
between the PC and the monitor. Under these situations, the PC sends
display data to the monitor but not commands to control the monitor
settings.
Note : PC must support DDC functions to do this.
If your monitor is displaying a mono chrome image or the wrong resolution, select the
DDC OFF function.
This monitor can sense when there is a
possible problem present, and informs you of
this condition by presenting you with a SELF
DIAGNOSTICS OSD. This OSD may pop up
A14