System Name - TANDBERG 550 MXP User Manual

D1372102_T550_MXP_User_Manual
4.1.2

System Name

System Name identifies the system:

On the welcome page.

During an MCU conference call.

When using the Web-interface.

When the codec is acting as an SNMP Agent.

Towards a DHCP server.

H323 ID. Other systems can call in using this name instead of IP-number/IP-address.
System Name is blank by default. System name can be alphanumeric and up to 50 characters
long. Follow the installation procedure to enter a System Name.
104