Follett T400A Installation, Operation And Service Manual page 7

Dimensions and clearances
§ Entire front of ice machine must be clear of obstructions/connections to allow removal.
§ 12" (30.5 cm) clearance above ice machine for service.
§ 6" (15.3 cm) minimum clearance between exhaust side of ice machine and any adjacent equipment.
§ MCD400A & R400A – 18" (45.7 cm) minimum, 10 ft (3 m) maximum clearance between discharge and air
intake grilles.
Front view — air-cooled
top mount
Front view — air-cooled
RIDE model
1.875" (48 mm)
Side view — air-cooled and water-cooled
top mount and RIDE model
22.75" (57.8 cm)
20.75" (52.7 cm)
17.00"
(43.2 cm)
RIDE model air-cooled units only
A – 3/4" MPT drain
B – 3/8" OD push-in water inlet
C – Electrical cord
C
12.875"
(32.7 cm)
F
8.375"
(21.3 cm)
B
4.75"
(12.1 cm)
A 2.25"
(57 mm)
Ice machine plug
configuration
NEMA 5-20
D – 3/8" FPT condenser inlet
E – 3/8" FPT condenser drain
F – Bin signal cord
T400A/W, MCD400A/W, R400A/W, MFD400A/W, D400A/W Ice Machines
Back view — air-cooled
13.00"
(33.1 cm)
4.875"
(12.4 cm)
2.375"
(61 mm)
Front view — water-cooled
RIDE model
Back view — water-cooled
top mount
D
E
1.875" (48 mm)
7.00" (17.8 cm)
top mount
C
B
A
C
F
6.875"
(17.5 cm)
B
A
(51 mm)
2"
7