TANDBERG GW Dataport Command Interface D13202 User Manual page 26

TANDBERG GW
Example of pristatus feedback:
*S pristatus b active 30 24 3
Gives status for incoming calls.
statin
statin [callid]
Status format:
statin <callid> <call-dir> <call-state> <restrict> <chan> <audio> <vidmode>
<vidres> <duores>
---
Parameters:
Example of statin feedback:
*S statin 1 outgoing sstatinynced norestrict h323-1920 g722 h263 cif unknown
*S statin 1 outgoing synced norestrict h323-1920 g722 h263 cif unknown
statout Gives status for outgoing calls.
statout[callid]
Status format:
statout<callid> <call-dir> <call-state> <restrict> <chan> <audio> <vidmode>
<vidres> <duores>
---
Parameters:
D13202 Rev 01
PRI interface: a/b/c/d. Letters identifying the different PRI interfaces.
a: PRI interface 1
o
b: PRI interface 2
o
c: PRI interface 3
o
d: PRI interface 4
o
status: disabled / red alarm / blue alarm/ yellow alarm / synced /
active
total numb. of channels: Total number of ISDN B channels.
B chans free: Total number of free B channels, i.e. B channels currently
not in use.
H0 chans free: Total number of free H0 channels, i.e. H0 channels
currently not in use.
callid: 1..16/32. Identifier referring to a call.
call-dir: incoming/outgoing
call-state: idle/syncing/capex/unframed/speech/disconn/synced
restrict: idle/norestrict/restrict
chan: unknown / idle / speech / h323-voip / h221-<chan> / bonding-
<chan> / h0-384 / h323 <chan>. Chan indicates number of B channels.
audio: unknown / idle / g728 / g722 / g722.1 / g711 / auoff
vidmode: unknown / vidoff / h261 / h263
vidres: unknown / cif / qcif / sqcif / 4cif / sif / 4sif // vga / svga / xga
duores: cif / qcif / sqcif / 4cif / sif / 4sif / vga / svga / xga
callid: 1..16/32. Identifier referring to a call.
call-dir: incoming/outgoing
call-state: idle/syncing/capex/unframed/speech/disconn/synced
restrict: idle/norestrict/restrict
chan: unknown / idle / speech / h323-voip / h221-<chan> / bonding-
<chan> / h0-384 / h323 <chan>, where chan indicates number of B
channels.
audio: unknown / idle / g728 / g722 / g722.1 / g711 / auoff
vidmode: unknown / vidoff / h261 / h263
Dataport Command Interface User Guide
26