Display Assembly - HP ProBook 440 G7 Maintenance And Service Manual

Display assembly

Before disassembling the display assembly, follow these steps:
1. Prepare the computer for disassembly
2. Place the computer in Battery Safe mode
3. Remove the bottom cover
4. Remove the battery
Disassemble the display assembly:
1. Remove the display assembly from the computer:
a. Disconnect the antenna cables from the WWAN module (1) and the WLAN module (2).
b. Disconnect the display cable from the system board ZIF connector (3).
c. Remove the four Torx T8 2.5 × 4.0 screws (1) that secure the display assembly to the computer.
(Preparation for disassembly on page
(Battery Safe mode on page
(Bottom cover on page
(Battery on page 36).
33).
34).
Component replacement procedures
33).
63