HP NetServer LH 3 Installation Road Map

HP NetServer
L H 3
l l a t i o
I n s t a
M a p
R o a d
Installation Overview
First: Install Hardware Using this Road Map
Verify contents
Obtain HP Navigator CD-ROM release history
View the Readme File
Test the system hardware using Diagnostic Assistant (optional)
Install Information Assistant
Visit Order Assistant (optional)
Install all hardware accessories
Verify installed hardware accessories (optional)
All manuals and user guides at all-guides.com
n
Second: Configure Hardware
Configure ISA non-Plug-and-Play board (if installed)
Select Network Operating System (NOS)
Configure Integrated Remote Assistant
Third: Install NOS
For certain versions of Novell NetWare and MS Windows NT, you may use the
HP automated installation process
For NOSs using a vendor-installation process, first create a NOS drivers
diskette, and view and print HP NOS Installation Instructions
Fourth: Install Server Management Software
Refer to the HP NetServer Remote Administrator Guide
Install HP TopTools
Notice
The information contained in this document is subject to change
without notice.
Hewlett-Packard makes no warranty of any kind with
regard to this material, including, but not limited to, the
implied warranties of merchantability and fitness for a
particular purpose. Hewlett-Packard shall not be liable for
errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance, or use
of this material.
Hewlett-Packard assumes no responsibility for the use or
reliability of its software on equipment that is not furnished by
Hewlett-Packard.
This document contains proprietary information that is protected
by copyright. All rights are reserved. No part of this document
may be photocopied, reproduced, or translated to another
language without the prior written consent of Hewlett-Packard
Company.
Hewlett-Packard Company
Network Server Division
P.O. Box 58059, Technical Marketing
Santa Clara, CA 95052-8059 USA
© Copyright 1998, Hewlett-Packard Company