Evolution Aqua Nexus 300 Instructions

Hide thumbs Also See for Nexus 300:

BACK WASH INSTRUCTIONS

From time to time, you may find that the level of water in the inner chamber overflows and the normal cleaning

procedure does not prevent this happening. At this point it may be necessary to carry out a Back Wash of your

Nexus. This is a simple operation which can be done during your normal cleaning procedure. See page 2.

OUTLET

NEXUS FILTRATION SYSTEMS

OUTER

INNER

CHAMBER

WASTE

INLET

Table of Contents

Do you have a question about the Nexus 300 and is the answer not in the manual?

Page 1 BACK WASH INSTRUCTIONS From time to time, you may find that the level of water in the inner chamber overflows and the normal cleaning procedure does not prevent this happening. At this point it may be necessary to carry out a Back Wash of your Nexus.
Page 2 BACK WASH INSTRUCTIONS Gravity Fed Installations: 1. Turn off the circulating pump, air pump and any device connected to the Nexus. 2. You will notice that the water in the inner and outer chambers will start to level out to the same level. (300 and 320 will need cleaning pipe inserted) 3.

Nexus 320