Table of Contents
Advertisement
Quick Links
SURFACE MOUNTED
WATER PUMPS
10461, 98922, 98923.
These instructions accompanying the product are the original instructions. This document is part of the product,
keep it for the life of the product passing it on to any subsequent holder of the product. Read all these
instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been
designed, and contains all the necessary information to ensure its correct and safe use. By following all the
general safety instructions contained in this manual, it will ensure both product and operator safety, together
with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper
Tools policy of continuous improvement determines the right to make modifications without prior warning.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Draper 10461
Summary of Contents for Draper 10461
- Page 1 AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
-
Page 2: Introduction
Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited. In all cases this copyright notice must remain intact. -
Page 3: Table Of Contents
CONTENTS 1. TITLE PAGE 1.1 INTRODUCTION......................2 1.2 REVISION HISTORY ....................2 1.3 UNDERSTANDING THIS MANUAL ................2 1.4 COPYRIGHT NOTICE....................2 2. CONTENTS..........................3 3. WARRANTY 3.1 WARRANTY......................... 4 4. INTRODUCTION 4.1 SCOPE......................... 5 4.2 SPECIFICATION ......................5 4.3 HANDLING AND STORAGE ..................5 5. -
Page 4: Warranty
This warranty applies in lieu of any other warranty expressed or implied and variations of its terms are not authorised. Your Draper warranty is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the warranty period. -
Page 5: Introduction
This machine was designed for pumping clear water. It is ideally suited to pumping out garden ponds where the water is free of debris. 4.2 SPECIFICATION Stock No........... 10461......98922 ....98923 Part No.............SP77.......SP90MS ....SP53 Motor: Rated voltage ..........230V......230V ...... 230V Rated frequency.......... -
Page 6: Health And Safety Information
HEALTH AND SAFETY INFORMATION Have this tool repaired by a qualified person. This tool is designed to conform to the relevant international and local standards and as such should be maintained and repaired by someone qualified; using only original parts supplied by the manufacturer: This will ensure the tool remains safe to use. -
Page 7: Power Tool Use And Care
HEALTH AND SAFETY INFORMATION 3) Personal safety continued... e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. -
Page 8: Connection To The Power Supply
HEALTH AND SAFETY INFORMATION 5.3 CONNECTION TO THE POWER SUPPLY Caution: Risk of electric shock. Do not open. These machines come supplied with a UK standard 3 pin plug fitted. Designed for connection to a domestic power supply rated at 230V AC. Because it is constructed mostly of metal parts, it is a Class 1 machine;... -
Page 9: Technical Description
TECHNICAL DESCRIPTION 6.1 IDENTIFICATION Discharge screw. Inlet (suction pipe). Priming screw. Outlet (pressure pipe). On/off switch. Approved 3 pin non-rewireable moulded plug and cable (not fitted to 110V models) Outlet elbow adaptor. Stock No. 98923 shown. - 9 -... -
Page 10: Unpacking And Checking
Lay the contents out and check them against the parts shown below. If any part is damaged or missing; please contact the Draper Helpline (the telephone number appears on the Title page) and do not attempt to use the machine. -
Page 11: Assembly
ASSEMBLY 8.1 CONNECT HOSES- FIGS. 1 - 2 FIG.1 NOTE:Remove the plug from the power supply before carrying out adjustment, servicing or maintenance. NOTE:This machine will not function without the use of a solid wall suction hose kit. Connect the suction hose into the suction inlet Connect the outlet elbow adaptor into the outlet... -
Page 12: Pump Operation
FIG.5 switch adjusted, if required, you are ready to turn on the pump. Plug your pump into a Residual Current Device (RCD) such as Draper Stock No.69307 or 89301 and connect to your mains supply. RCD’s sold separately - 12 -... -
Page 13: Troubleshooting
10. TROUBLESHOOTING 10.1 TROUBLESHOOTING CHECKLIST WARNING: For your own safety, always turn the main switch on the machine "Off" and remove the plug from the power supply before carrying out any servicing or maintenance. The pump delivers 1. The suction grid or piping 1. -
Page 14: Explanation Of Symbols
11. EXPLANATION OF SYMBOLS 11.1 EXPLANATION OF SYMBOLS Single value noise marking. (Maximum declared A-Weighted sound power level in decibels). Do not dispose of WEEE* unsorted municipal waste. Warning! Read the instruction manual. - 14 -... -
Page 15: Disposal
12. DISPOSAL 12.1 DISPOSAL – At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations. – Contact your local authority for details of collection schemes in your area. In all circumstances: •... - Page 16 ©Published by Draper Tools Limited. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
Need help?
Do you have a question about the 10461 and is the answer not in the manual?
Questions and answers