Advertisement
Quick Links
SURFACE
MOUNTED PUMP
■ STOCK Nos.56225
■ PART Nos.SP50
56226
SP60
• INSTRUCTIONS •
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE
SAFE AND EFFECTIVE USE OF THIS TOOL.
10/2004
GENERAL INFORMATION
This manual has been compiled by Draper Tools and is an integrated part of the product with which it is enclosed
and should be kept with it for future references.
This manual describes the purpose for which the product has been designed and contains all the necessary
information to ensure its correct and safe use. We recommend that this manual is read before any operation or,
before performing any kind of adjustment to the product and prior to any maintenance tasks. By following all the
general safety instructions contained in this manual, it will ensure both product and operator safety, together with
longer life of the tool itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure accuracy of information contained in this manual, the Draper Tools
policy of continuous improvement determines the right to make modifications without prior warning.
Advertisement
Related Manuals for Draper SP50
Summary of Contents for Draper SP50
- Page 1 10/2004 GENERAL INFORMATION This manual has been compiled by Draper Tools and is an integrated part of the product with which it is enclosed and should be kept with it for future references. This manual describes the purpose for which the product has been designed and contains all the necessary information to ensure its correct and safe use.
- Page 2 Getting to Know Your Surface Mounted Pump Assembly Pump Operation Maintenance/Optional Accessories DECLARATION OF CONFORMITY Draper Tools Ltd. Hursley Road, Chandler’s Ford, Eastleigh, Hampshire. SO53 1YF. England. Declare under our sole responsibility that the product: Stock Nos:- 56225 & 56226. Part Nos:- SP50 & SP60.
- Page 3 This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the 12 month period.
- Page 4 (i.e. red). Fuse covers are available from your Draper Tools stockist. If the fitted plug is not suitable, it should be cut off and destroyed. *The end of the cable should now be suitably prepared and the correct type of plug fitted.
- Page 5 IMPORTANT: Draper Tools Limited recommends that this machine should not be modified or used for any application other than that for which it was designed. If you are unsure of its relative applications do not hesitate to contact us in writing and we will advise you.
- Page 6 ADDITIONAL SAFETY RULES 1. Before connecting to the power supply: i. A residual current circuit breaker (RCD) must be used for all applications. ii. The electrical supply should be the same as stated on the rating plate. 2. Surface mounted pumps should always be transported and stored horizontally on the base plate.
- Page 7 ASSEMBLY NOTE: Fig.1. Remove the plug from the power supply before carrying out adjustment, servicing or maintenance. NOTE: This machine will not function without the use of a solid wall suction hose kit. Connect the suction hose (A) into the suction inlet (B).
- Page 8 MAINTENANCE The pump is completely maintenance free. If the pump becomes clogged, you should clean it out by running clean water through it. While the water is running through, start up the pump several times for approximately 2-3 seconds. This operation should remove any obstruction.
- Page 9 NOTES - 8 -...
- Page 10 NOTES...
- Page 11 NOTES...
- Page 12 ©Published by Draper Tools Ltd. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
Need help?
Do you have a question about the SP50 and is the answer not in the manual?
Questions and answers