Advertisement
These instructions apply to the following model:
The FOLD articulated automated system automates residential
swing-leaf gates with leaves of up to 1.8 m in length. It consists of
non-reversing electro-mechanical articulated operators,
powered by a 12 Vdc battery, each coupled to a control board
recharging the battery. The SLAVE equipment (required on 2-leaf
gates only) is controlled by the MASTER equipment to which all
accessories and pulse generators are connected. The MASTER
card can be programmed and is used to set the following:
function logics, work times (by self-learning) and pause times, leaf
speed, and the sensitivity of the anti-crushing device.
The "toggle" lever system ensures the gate is mechanical locked
when the leaves are closed. A release system enables the gate
to be moved by hand in case of trouble.
The gearmotor is supplied with a mechanical limiter which
protects the transmission system against damage if the leaves are
struck when moving or when open.
The FOLD automated system was designed and built for controlling
vehicle access. Do not use for any other purpose.
1. DESCRIPTION AND TECHNICAL SPECIFICATIONS
FOLD Automated System
FOLD
Fold operator
Rear fitting
Front fitting
Release
Control board
Board support
Battery
Terminal board (Master only)
Transformer (Optional item)
Enclosure in class IP 55
TAB. 1 TECHNICAL SPECIFICATIONS OF FOLD OPERATOR
MODEL
Power supply
Rated absorbed power (W)
Max torque (Nm)
Max load-free angular velocity (°/sec)
Use frequency (cycles/hour)
Consecutive cycles on charged battery
Recharging time
Type of reduction gear
Operating ambient temperature
Operator weight (Kg)
Protection class
Leaf maximum length (m)
Leaf max weight (kg)
Operator overall dimensions LxHxD (mm)
Length of operator power cable
2. DIMENSIONS
OPERATOR
• Dimensions in mm
Fig. 1
13
10' for each completed cycle
FOLD
ENGLISH
FOLD
12Vdc
48
17
17 (0,4 rad/sec)
5
max.15
epicycloid
-20 ÷ +55 °C
2,8
IP 44
1.80
250
see fig.2
0,7 m
CONTROL
BOARD
ENCLOSURE
Fig. 2
Advertisement
