Table of Contents
Advertisement
1 Technical Information
KERN
Readout (d)
Weighing range (max)
Taring range (subtractive)
Minimum weight for counting parts
Adjusting weight
Optimal temperature range
Permissible relative humidity (non
condensing)
Weighing plate
Size (W x D x G) mm
2 Assembling the Balance
2.1 Unpacking the Balance
Carefully remove the balance from the packaging and out of the plastic covering,
then place the balance on the assigned position.
Amount of delivery:
• Pocket balance
• Case for the balance
• Operating instructions
• Battery (already inserted)
2.2 Set up
Set up the balance on a horizontal stable base (see "Important Information").
2.3 Battery operation and change
• Remove the battery cover from the bottom of the balance
• Connect 9 V PP3 batteries.
• Re-insert the Battery cover
• Battery conservation through automatic power-off 1 –2 minutes after ending a
weighing operation.
• When the battery power is used the display will show "LO". Press the OFF key
and change the battery at once.
• When the balance is not in use for a longer of period time remove batteries and
keep them separately- Leakage of battery liquid might damage the balance.
10
466-41
0,1 g
80 g
80 g
1 g
50 g
20 – 25° C
15 – 85 %
67 x 85
75 x 120 x 20
466-BA-defsi-0016
466-45
0,1 g
250 g
250 g
1 g
200 g
Advertisement
Table of Contents
