Cisco Firepower 1010 Hardware Installation Manual page 15

Overview
Note Only the approved power cords or jumper power cords provided with the chassis are supported.
The following power cords are supported.
Figure 8: Argentina (CAB-AC-C5-ARG)
1 Plug: IRAM 2073
3 Connector: IEC 60320/C5
Figure 9: Australia (CAB-AC-C5-AUS)
1 Plug: AUS 10S3
Connector: IEC 60320/C5
3
Figure 10: Brazil (CAB-AC-C5-BRA)
1 Plug: NBR 14136
3 Connector: IEC 60320/C5
2 Cord set rating: 2.5 A, 250 V
2 Cord set rating: 2.5 A, 250 V
2 Cord set rating: 2.5 A, 250 V
Cisco Firepower 1010 Hardware Installation Guide
Power Cord Specifications
11