Overview - Cisco Firepower 1010 Hardware Installation Manual

Overview

•
•
•
•
•
•
•
•
•
Features
The Cisco Firepower 1010 security appliance is an NGFW desktop product in the Cisco Firepower family of
devices with PoE+ and L2 switch support.
Note The PoE+ and L2 switch features are supported starting with Firepower Version 6.5.
The Firepower 1010 supports Cisco Firepower software version 6.4 and later. See the
Compatibility
system and hosting environment requirements, for each supported Firepower version.
See Product ID Numbers, on page 10
The following figure shows the Cisco Firepower 1010.
Features, on page 1
Package Contents, on page 4
Serial Number Location, on page 5
Front Panel, on page 6
Rear Panel, on page 6
Status LEDs, on page 7
Hardware Specifications, on page 9
Product ID Numbers, on page 10
Power Cord Specifications, on page 10
Guide, which provides Cisco Firepower software and hardware compatibility, including operating
C H A P T E R
for a list of the product IDs (PIDs) associated with the Firepower 1010.
Cisco Firepower 1010 Hardware Installation Guide
1
Cisco Firepower
1