Tenda AC1200 User Manual page 83

Parameter
Port
An example of configuring remote web-based management
An AC8 is used to set up a network to in an apartment, and needs to be logged in and managed
over the internet. Assume the public IP address of the router is 102.105.106.55 and that of the
computer for remote management is 210.76.200.101.
The following figure shows the application scenario.
Ethernet cable
Computer 1 (web server)
The computer used to remotely log in to the web UI of the router must be assigned a public IP
address. If it is assigned a private IP address, use the public IP address of the router to which the
computer connects for remote login. Private IP addresses are not applicable to remote management.
Configuration procedure:
Step 1 Choose Administration, and move to the Remote Web-based Management module to
enter the configuration page.
Step 2 Check the Enable option.
Step 3 Set Management IP Address to Specific, and enter 210.76.200.101.
Step 4 Click OK at the bottom of the page.
Description
It specifies the port number to access the router remotely. It is 80 by default, and
can be modified if necessary.
Port 1 to 1024 are occupied by well-known services. It is recommended to modify
the port to be in the range from 1025 to 65535.
To access the web UI of the router by the URL:
number. If DDNS is enabled on the router, you can access the web UI by
http://WAN domain name:port number.
Ethernet cable
http://WAN IP address:port
Internet
WAN IP address of the
router: 102.105.106.55
IP address of computer 2:
210.76.200.101
79
Computer 2