Remote Web-Based Management - Tenda AC1200 User Manual

12.4

Remote web-based management

Generally, the web UI of the router can only be accessed on devices that are connected to the
router by a LAN port or wireless connection. When you encounter a network fault, you can ask for
remote technical assistance, which improves efficiency and reducing costs and efforts. By default,
this function is disabled. The following figure displays as below when this function is enabled.
Configuring remote web-based management
Configuration procedure:
Step 1 Choose Administration, and move to the Remote Web-based Management module to
enter the configuration page.
Step 2 Select the Enable option.
Step 3 Set Management IP Address to Specific, and enter a specified IP address.
Step 4 Enter a port number used to access the router remotely.
Step 5 Click OK at the bottom of the page.
---End
Parameter description
Parameter
Remote Web-based
Management
Management IP Address
Description
Used to enable/disable Remote Web-based Management function. It is disabled
by default.
It specifies the IP address to manage the router remotely.
All: It indicates that all internet users can access the web UI of the router. It is

not recommended to select this option for network security.
Specific: It indicates that only the user with the specified public IP address is

allowed to access the web UI of the router remotely. If the host for remote
access is in an intranet, enter the public IP address of the computer's gateway
here.
78