Warranty Information; Return For Repair Policy - General DAMP60 User Manual

DAMP60_68_MANUAL_FINAL_F-111511_awb 11/15/11 3:24 PM Page 22

WARRANTY INFORMATION

General Tools & Instruments' (General's) DAMP60
and DAMP68 Auto Ranging Clamp Meters are
warranted to the original purchaser to be free
from defects in material and workmanship for a
period of one year. Subject to certain restrictions,
General will repair or replace this instrument
if, after examination, the company determines it
to be defective in material or workmanship.
This limited warranty does not apply to damages
that General determines to be from an attempted
repair by non-authorized personnel or misuse,
alterations, normal wear and tear, or accidental
damage. The defective unit must be returned to
General Tools & Instruments or to a General-
authorized service center, freight prepaid and
insured.
Acceptance of the exclusive repair and
replacement remedies described herein is a
condition of the contract for purchase of this
product. In no event shall General be liable for
any incidental, special, consequential or punitive
damages, or for any cost, attorneys' fees,
expenses, or losses alleged to be a consequence
of damage due to failure of, or defect in any
product including, but not limited to, any claims
for loss of profits.
22

RETURN FOR REPAIR POLICY

Every effort has been made to provide you with a
reliable product of superior quality. However, in
the event your instrument requires repair, please
contact our Customer Service to obtain an
RGA (Return Goods Authorization) number before
forwarding the unit via prepaid freight to the
attention of our Service Center at this address:
General Tools & Instruments
80 White Street
New York, NY 10013
212-431-6100
Remember to include a copy of your proof of
purchase, your return address, and your phone
number and/or e-mail address.
23