Specifications - Autotek TransAm TA 4150 User Manual

Please read the user's manual carefully before the installation and the first operation
of the amplifier.

SPECIFICATIONS

Output Power RMS
Output Power Max.
Loudspeaker impedance (stereo)
Frequency Response
Total Harmonic Distortion
Signal-to-Noise Ratio
Input Sensitivity
Input Impedance
Low Pass Filter (CH3&4)
High Pass Filter (CH3&4 + CH1&2)
Bass EQ (CH3&4)
Operating Voltage
Fuse Rating
Dimensions (B x H x L)
All Specifications are subject to change
8
TA4150
4 x 75 W @ 4 Ohms
4 x 150 W @ 2 Ohms
4 x 150 W @ 4 Ohms
4 x 250 W @ 2 Ohms
2 – 8 Ohm
5 – 50 000 Hz (-3 dB)
< 0,1 % (1 kHz)
> 80 dB
0,2 – 5 V (RCA)
0,4 – 10 V (High Level Inputs)
10 kOhm
50 – 250 Hz @ 12 dB/Octave
60 – 1200 Hz @ 12 dB/Octave
Switchable 0 / 6 / 12 dB @ 45 Hz
+12 V (9 – 15 V), negative ground
2 x 25 A
223 x 63 x 300/326 mm