Advertisement
Quick Links
- 1 Table of Contents
- 2 General Installation Procedure
- 3 Amplifier Feature Descriptions
- 4 Axl1050.2 / Axl1650.2 / Axl3050.2 2-Channel Amplifier Applications
- 5 Axl1050.4 / Axl1450.4 / Axl4050.4 4 Channel Amplifier Applications
- 6 Setting up Systems after Installation for Best Performance
- 7 Axl1550.1 / Axl2550.1 A/B-Class 1 Channel Amplifier Applications
- 8 Features and Specifications
- Download this manual
Advertisement
Related Manuals for Autotek AXL1050.2
Summary of Contents for Autotek AXL1050.2
- Page 1 EVOLUTION OF POWER AMPLIFIERS AXL1050.2 / AXL1650.2 / AXL3050.2 AXL1050.4 / AXL1450.4 / AXL4050.4 AXL1550.1 / AXL2550.1...
-
Page 2: Table Of Contents
AXL SERIES AMPLIFIERS Congratulations on your purchase and thank you for supporting AUTOTEK! The AXL Series products have been designed to a very high level of performance, with features unavailable in similarly priced amplifiers. These amplifiers have variable crossovers built in, with added touches such as subsonic filter, bass equalization and a remote Level control module (some models) that allows subwoofer Level control from the drivers seat. -
Page 3: General Installation Procedure
GENERAL INSTALLATION PROCEDURE System Design The success of any car stereo system relies on several factors, such as the system design, execution of the installation, and system setup. Please remember that any system is only as good as its weakest link. Please remember that higher power systems are not necessarily useful purely for high sound pressure levels, but also to establish a headroom capability, to reproduce musical peaks cleanly without distortion. -
Page 4: Amplifier Feature Descriptions
Each multi channel model is capable of 4 & 2-Ohms stereo per channel, or 4-Ohms mono bridged All Autotek amplifiers feature a comprehensive diagnostic system, with speaker lead short circuit, and operation. The AXL1550.1 is stable at 4 & 2-Ohms while the AXL2550.1 is stable at 4, 2 & 1-Ohm. -
Page 5: Axl1050.2 / Axl1650.2 / Axl3050.2 2-Channel Amplifier Applications
TO BATTERY + 12 volts VIA FUSE REMOTE TURN-ON CHASSIS GROUND MONO This application illustrates the basic mono bridging method for all Autotek 2 channel Switch setting checklist: amplifiers. - The X-OVER switch must be in the LPF position. - The MODE switch must be in the MONO position. - Page 6 AXL1050.2 / AXL1650.2 / AXL3050.2 2-CHANNEL AMPLIFIER APPLICATIONS Stereo high pass with mono low-pass in a 2 way active, or bi-amplified system In this application we will use a 2 channel amplifier for the high frequencies, and a second Crossover frequency control checklist: one for the low frequencies, or mono sub bass.
-
Page 7: Axl1050.4 / Axl1450.4 / Axl4050.4 4 Channel Amplifier Applications
Here we show how to use the 4 channel amplifiers as full range 2 or 3 channel units by Crossover frequency control checklist: taking advantage of the mono bridging capability of all Autotek amplifiers. Channels 1/2: - HI PASS: N/A... -
Page 8: Axl1550.1 / Axl2550.1 A/B-Class 1 Channel Amplifier Applications
AXL1550.1 / AXL2550.1 1 CHANNEL AMPLIFIER APPLICATION Basic application These sub bass amplifiers can be used in any of the bi-amplification systems described in Crossover frequency control checklist: this manual, replacing the 2 channel amplifiers as per the illustrations. LOW PASS: 80Hz (approximately 11 o’clock) SUBSONIC:35Hz (approximately 1 o’clock) Interconnect cable checklist: BASS EQ: 12 o’clock max... - Page 10 PART: A1112...