Advertisement
D. Install the camera
1. Be sure to have the required accessories and tools
available.
2. Refer to the User Guide as necessary.
3. Using the provided template, mark the drill locations
4. Mount the camera.
5. Check that camera orientation covers the required field of
view.
F. Discover the Camera
The camera's web interface can be
accessed by Internet Explorer 10 and higher (32-
bit) with the ActiveX plug-in and by browsers that
do not require ActiveX, such as Microsoft Edge,
Chrome or Firefox, on PCs running 64-bit
Windows 7, 8, 8.1, or 10.
G: Completing Camera Setup
1. 1. For Varifocal models ( CB-3102-11) , use the Web Interface to set Zoom and Focus.
Default Username is Admin, password 1234.
Set the Camera's IP address and Video Format
1. Download and install the DNA Utility from the FLIR website as
shown above
2. Attach the unit to the same LAN segment as the computer that is
managing the unit. DNA automatically discovers the unit on the
network and displays the device's current IP address in the
Discover List.
3. Select the unit from the Discover List.
FLIR Systems, Inc.
Tel: +1-800-254-0632
CC-3102_QIG_v3
E. Connect the camera
1. Insert a cable in the RJ45
connector to attach to the
network switch for a 10/100
Mbps Ethernet and POE
connection.
Note:
This camera must be connected
to a PoE source.
2. Connect the Audio-IN and Alarm-
IN connectors
4. If using a Static IP address (as on a Latitude System), follow the
DNA instructions to set the desired IP address.
5. On a system using DHCP, select the DHCP option in DNA.
6. To select PAL or NTSC, select the device in the Discover list,
right-click to open the context menu and clicking Change Video
Format.
5. Click Update.
2. For SoE recording use the Web interface to check SD card
status, and format it.
a. Verify that the card status is displayed as Mounted in
the System > Events Handler > SD Card screen.
b. Format the card.
c. Configure the camera to store snapshots and recordings from the
System > Events Source screens.
H. Attach to VMS
Once you have completed installation and setup and found the current IP
address with DNA, use your VMS Discovery/Attach procedures to attach the
camera to your VMS.
6769 Hollister Ave.
product.enterprise.support@flir.com
Connectors
White - Audio IN
Grey - GND
Purple - Alarm IN
Yellow - GND
Goleta, CA 93117
www.flir.com/security
Advertisement
