Adjusting Temperature And Cooking Time During The Program Execution; Program Cancelation; Restore The Factory Settings; Cooking Programs - Polaris EVO 0225 Operating Instructions Manual

• The appliance will give off the sound signal and the "KEEP WARM / CANCEL / ПОДОГРЕВ / ОТМЕНА" button
indicator will go out.
• To activate automatic switching into the KEEP WARM / ПОДОГРЕВ mode again press the "START / СТАРТ" touch
button, the "START / СТАРТ" button indicator will light again.
• If the temperature of the last completed step is lower than 73°С, the appliance will not switch into the KEEP WARM
/ ПОДОГРЕВ mode.

4.4. Adjusting temperature and cooking time during the program execution

You can adjust time (in all programs) and temperature (in programs «Fry / Жарка», «Oil fry / Жарка в масле»,
«Мультиповар Plus») settings of course during the program execution.
To do this:
• Press and hold for 2 seconds one of the touch buttons "
• Timer o the display will start blinking.
• Adjust cooking time by pressing the touch button "
• To switch to adjusting temperature press and hold for 2 seconds the touch button "ТЕМПЕРАТУРА / ВРЕМЯ /
TEMPERATURE / TIME".
62
• Temperature will start blinking on the display.
• Adjust temperature by pressing the touch button "
• Press and hold the touch button "START / СТАРТ" and program will start with new parameters otherwise, the
program execution will start automatically 5 seconds after modifications.
• Please bear in mind that the total cooking time, i.e. the time elapsed plus the new time setting, should not exceed the
maximum operation time determined for the program selected.

4.5. Program cancelation

If necessary you can cancel the program execution any time using the "KEEP WARM / CANCEL / ПОДОГРЕВ / ОТМЕНА".
Press and hold for 2 seconds the touch button, the appliance will give off a sound signal and switches to stand-by mode.
Attention!
In case of a power cut the appliance saves the current time and temperature settings. After restoring the power supply
the program will continue operating.
" or " ".
" and " ".
" and " ".

4.6. Restore the factory settings

If you need to restore the factory settings and clear memory of recipes in the Мультиповар Plus:
• Plug the multicooker in.
• Make sure that the multicooker is in stand-by mode (на таймере прочерки, the "Start / Старт" touch button indicator
blinks).
• Press the "MENU / МЕНЮ" and "
" touch buttons and hold them until you hear a triple sound signal (for about 5
seconds).

4.7. Cooking programs

«Мультиповар Plus»
This model features multistep program «Мультиповар Plus» with manual settings. The program is to be activated in stand-by
mode by pressing the same-name touch button and allows to set different temperature for several (1-9) successive cooking steps
as well as to set duration of each step with total cooking time up to 12 hours. The cooking step indicator is located in the top right
corner of the display. The program «Мультиповар Plus» can save in memory from 1 to 5 multistep recipes. To save in memory
created recipe you are to hold the touch button until you hear a sound signal after programming all cooking stages. At that the
display will show the "Recipes / Рецепты" indicator and number of cell in which the recipe will be saved. The number of cells
available is from 1 to 5. If there are any recipes stored in memory you can select the number of cell for saving recipe by pressing
the " " and " " touch buttons. Cell №1 is available for saving by default. By pressing the "
select another cell. At that if less than 5 recipes are saved in memory the last cell number will be free. If recipes are saved in all
5 cells new recipe can be saved in any cell as chosen, but settings saved in this cell before will be deleted. After selecting the cell
recipe is to be saved in memory by pressing the "TEMPERATURE / TIME / ТЕМПЕРАТУРА / ВРЕМЯ" touch button. The multicooker
will give off a sound signal and switch to stand-by mode. To select recipe from memory is carried out in stand-by mode by holding
for 5 seconds the "MENU / МЕНЮ" touch button. The display will show the "Recipes / Рецепты" indicator and number of cell. After
selecting the recipe you need by pressing the" " and "
button. The settings of the cooking steps saved in memory are displayed in the mobile application only in accordance with its user
manual.
The delayed start function is available for the program «Мультиповар Plus» (see 4.2.)
1. Place the ingredients into the bowl according to the
recipe
2. Install the bowl into the multicooker
" and " " touch buttons you can
" touch buttons press and hold for 2 seconds the "START / СTAPT" touch
• Follow the proportions of food recommended and
order of their adding to the bowl
• Always make sure that the bowl is correctly installed
63