Table of Contents
Advertisement
Super X11SDD-8C/18C-F User's Manual
MMIO High Granularity Size
Use this feature to select the high memory size according to memory-address mapping for
the IO hub. The options are 1G, 4G, 16G, 64G, 256G, and 1024G.
PCI PERR/SERR Support
Use this feature to enable or disable the runtime event for PCI errors. The options are Disabled
and Enabled.
Maximum Read Request
Use this feature to select the Maximum Read Request size of the PCI-Express device, or
select Auto to allow the system BIOS to determine the value. The options are Auto, 128
Bytes, 256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, and 4096 Bytes.
MMCFG Base
Use this feature to select the low base address for PCI-E adapters to increase base memory.
The options are 1G, 1.5G, 1.75G, 2G, 2.25G, and 3G.
VGA Priority
Use this feature to select VGA priority when multiple VGA devices are detected. Select On-
board to give priority to your onboard video device. Select Offboard to give priority to your
graphics card. The options are Auto, Onboard, and Offboard.
PCIe/PCI/PnP Configuration
Onboard NVME 1 OPROM
Use this feature to select which firmware to be loaded for the add-on card in this slot. The
options are Disabled, Legacy, and EFI.
Onboard NVME 2 OPROM
Use this feature to select which firmware to be loaded for the add-on card in this slot. The
options are Disabled, Legacy, and EFI.
CPU MICRO-LP PCI-E 3.0 X8
Use this feature to select which firmware to be loaded for the add-on card in this slot. The
options are Disabled, Legacy, and EFI.
CPU SLOT PCI-E 3.0 X8
Use this feature to select which firmware to be loaded for the add-on card in this slot. The
options are Disabled, Legacy, and EFI.
Onboard Video OPROM
Use this feature to select the Onboard Video Option ROM type. The options are Disabled,
Legacy, and UEFI.
68
Advertisement
Table of Contents
