Table of Contents
Advertisement
Super X11SDD-8C/18C-F User's Manual
Enhanced Halt State (C1E)
Select Enable to use Enhanced Halt State technology, which will significantly reduce the
CPU's power consumption by reducing its clock cycle and voltage during a Halt state.
The options are Disable and Enable.
Package C State Control
Package C State
This feature allows the user to set the limit on the C State package register. The options
are C0/C1 State, C2 State, C6 (non Retention) state, C6 (Retention) state, No Limit,
and Auto.
Chipset Configuration
Warning: Setting the wrong values in the sections below may cause the system to malfunction.
North Bridge
This feature allows the user to configure the following North Bridge settings.
Memory Configuration
Enforce POR
Select POR (Plan of Record) to enforce POR restrictions on DDR4 frequency and volt-
age programming. The options are POR and Disable.
Memory Frequency
Use this feature to set the maximum memory frequency for onboard memory modules.
The options are Auto, 1000, 1200, 1333, 1400, 1600, 1800, 1866, 2000, 2133, 2200,
2400, 2600, and 2666.
IMC Interleaving
This feature allows the user to configure Integrated Memory Controller (IMC) Interleaving
settings. The options are Auto, 1-way Interleave, and 2-way Interleave.
Data Scrambling for NVDIMM
Use this feature to enable or disable data scrambling support for NVDIMM. The options
are Auto, Disable, and Enable.
56
Advertisement
Table of Contents
